fintek f81534

I/O Controller and I/F Management Environment Sensor and Glue Logic IC Power Management and ACPI Controller Embedded Controller Interface and connectivity LED Driver IC USB Fast Charging USB Type-C & Power Delivery (PD)

Each UART includes 128-byte send/receive FIFO, complete modem control capability, & an interrupt system. The F81534 includes +1.8V & +3.3V LDO regulators for

About Fintek Company Profile vision & philosophy Quality Policy History Contact Us Leave a message Products I/O Controller and I/F Each UART includes 128-byte send/receive FIFO, complete modem control capability, & an interrupt system. The F81534

I/O Controller and I/F Management eSPI/LPC/USB/PCIE I/F Controller Super Hardware Monitor + SIO Hardware Keyboard Controller USB Consumer IR (CIR) receiver IC for Windows Vista/Windows 7 Power Saving (EUP) SIO & Controlloer Transceiver and Buffer SIO

2. Logic/Phy Port mapping rewrite in f81534_port_probe() & f81534_phy_to_logic_port(). 3. Introduced “Port Hide” function. Some customer use F81532 reference design for HW layout, but really use F81534 IC. We’ll check F81534_PORT

[PATCH] usb:serial: Add Fintek F81532/534 driver Showing 1-11 of 11 messages [PATCH] usb:serial: Add Fintek F81532/534 driver Ji-Ze Hong (Peter Hong) 5/30/16 6:40 PM This driver is for Fintek F81532/F81534 USB to Serial Ports IC. F81532 spec:

About Fintek Company Profile vision & philosophy Quality Policy History Contact Us Leave a message Products I/O Controller and I/F Management Environment Sensor and Glue Logic IC Power Management and ACPI Controller Embedded Controller I/O

> + * The F81532/F81534 had 1 control endpoint for setting, 1 endpoint bulk-out > + * for all serial port TX and 1 endpoint bulk-in for all serial port read in > + * (Read Data/MSR/LSR).

+ FINTEK_DEVICE_ID, F81534_NUM_PORT, uart_mode_rs232, + {+ /* please reference f81439 io port */ I can’t seem to find anything about a f81439 io port. Do you have a link? I believe I already asked you to describe the following function in a comment here.

This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Features: 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC 2. Support Baudrate from B50 to B1500000 (excluding B1000000). 3. The RTS signal can be transformed their behavior with configuration

Implement Fintek f81534 break on/off with LCR register It’s the same with 16550A LCR register layout We’ll add a shadow LCR variable to save the final LCR we had set due to the “read ep0” operations maybe slow down all the serial ports performance. Signed-off

Implement Fintek f81534 break on/off with LCR register It’s the same with 16550A LCR register layout We’ll add a shadow LCR variable to save the final LCR we had set due to the “read ep0” operations maybe slow down all the serial ports performance. Signed-off

This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Features: 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC 2. Support Baudrate from B50 to B1500000 (excluding B1000000). 3. The RTS signal can be transformed their behavior with configuration

+#define DRIVER_DESC “Fintek F81532/F81534” +#define FINTEK_VENDOR_ID_1 0x1934 +#define FINTEK_VENDOR_ID_2 0x2C42 +#define FINTEK_DEVICE_ID 0x1202 +#define F81534_MAX_TX_SIZE 100 +#define F81534_MAX_RX_SIZE 124 +#define F81534

22/10/2015 · This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Features: 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC 2. Support Baudrate from B50 to B1500000 (excluding B1000000). 3. The RTS signal can be transformed their behavior with configuration

On Wed, Dec 02, 2015 at 03:18:59PM +0800, Peter Hung wrote: > This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Do you have a pointer to datasheets and/or information about these devices? Can’t seem to find anything on Fintek’s homepage.

[V10,1/1] usb:serial: Add Fintek F81532/534 driver 712688 diff mbox series Message ID [email protected] State New, archived Headers show

> This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Do you have a pointer to datasheets and/or information about these devices? Can’t seem to find anything on Fintek’s homepage. > Features: > 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC

This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Features: 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC 2. Support Baudrate from B50 to B1500000 (excluding B1000000). 3. The RTS signal can be transformed their behavior with configuration

This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Features: 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC 2. Support Baudrate from B50 to B1500000 (excluding B1000000). 3. The RTS signal can be transformed their behavior with configuration

V11 1/1] usb:serial: Add Fintek F81532/534 driver From: Johan Hovold Date: Wed Nov 02 2016 – 08:37:39 EST > +#define DRIVER_DESC “Fintek F81532/F81534” > +#define FINTEK_VENDOR_ID_1 0x1934 > +#define FINTEK_VENDOR_ID_2 > >

On Fri, Dec 09, 2016 at 01:39:34PM +0800, Ji-Ze Hong (Peter Hong) wrote: > Implement Fintek f81534 break on/off with LCR register > It’s the same with 16550A LCR register layout > We’ll add a shadow LCR variable to save the final LCR we > had set due to the “read ep0” operations maybe slow down all

Re: [PATCH V12 1/1] usb:serial: Add Fintek F81532/534 driver From: Johan Hovold Date: Thu Nov 24 2016 – 10:04:35 EST Next message: Eugeniy Paltsev: “[PATCH v5 0/2] DW DMAC: update device tree” Previous message: Ulf Hansson: “[GIT PULL] MMC

[V9,1/1] usb:serial: Add Fintek F81532/534 driver 682744 diff mbox series Message ID [email protected] State New, archived Headers show

F81532 is 1-to-2 & F81534 is 1-to-4 serial ports IC 2. Support Baudrate from B50 to B115200. Signed-off-by: Ji-Ze Hong (Peter Hong)

This driver is for Fintek F81532/F81534 USB to Serial Ports IC. F81532 spec: https://drive.google.com/file/d/0B8vRwwYO7aMFOTRRMmhWQVNvajQ/view?usp=sharing F81534 spec

> This driver is for Fintek F81532/F81534 USB to Serial Ports IC. > > Features: > 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC > 2. Support Baudrate from B50 to B1500000 (excluding B1000000). > 3. The RTS signal can be transformed their behavior >

Generated on 2019-Mar-29 from project linux revision v5.1-rc2 Powered by Code Browser 2.1 Generator usage only permitted with license.

Re: [PATCH V12 1/1] usb:serial: Add Fintek F81532/534 driver From: Ji-Ze Hong (Peter Hong) Date: Mon Nov 28 2016 – 21:33:53 EST Next message: Stefan Agner: “Re: [PATCH 1/2] drm/fsl-dcu: remove separate compilation unit for fbdev emulation”

This driver is for Fintek F81532/F81534 USB to Serial Ports IC. Features: 1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC 2. Support Baudrate from B50 to B1500000 (excluding B1000000). 3. The RTS signal can be transformed their behavior with configuration

Re: [PATCH V2 1/1] usb:serial:f81534 Add F81532/534 Driver From: Johan Hovold Prev by Date: Re: [PATCH 1/1] sched: apply ifdef CONFIG_SMP to meaningful code only on SMP system

Message ID [email protected] State New, archived Headers show

Message ID [email protected] State New, archived Headers show

[V2,2/5] usb: serial: f81534: add auto RTS direction support 869735 diff mbox series Message ID [email protected] State New, archived Headers show

[V1,2/4] usb: serial: f81534: add auto RTS direction support 851680 diff mbox series Message ID 1510818369-10[email protected] State New, archived Headers show

v2: 1: Add commit message for F81534_USB_TIMEOUT from 1000 to 2000 and trigger level from UART_FCR_R_TRIG_11 to UART_FCR_TRIGGER_8. 2: Separate UART Enable bit from clock sources. 3: Add help function “f81534_find_clk()” to calculate baud

The F81532/534 had 4 clocksource 1.846/18.46/14.77/24MHz and baud rates can be up to 1.5Mbits with 24MHz. F81532/534 Clock register (offset +08h) Bit0: UART Enable

The F81532/534 had auto RTS direction support for RS485 mode. We’ll read it from internal Flash with address 0x2f01~0x2f04 for 4 ports. There are 4 conditions below: 0: F81534_PORT_CONF_RS232. 1: F81534_PORT_CONF_RS485. 2: value error, default to

Signed-off-by: Ji-Ze Hong (Peter Hong) — v2: 1: Add commit message for F81534_USB_TIMEOUT from 1000 to 2000 and trigger level from UART_FCR_R_TRIG_11 to UART_FCR_TRIGGER_8. 2: Separate UART Enable bit from

U-Boot, Linux, Elixir. 2020 internships. U-Boot, Linux, Elixir. Elixir Cross Referencer. Home; Engineering; Training; Docs; Community; Company; twitter; mastodon

 · PDF 檔案

1xUSB 2.0 bus reserved for USB2.0 to 4 x UART IC(Fintek F81534) COM Port Built-in USB 2.0 to 4xUART controller(it is Fintek F81534) supports 4xCOM port(See below information and the current for each COM port is 500mA) COM1~4 belongs to 2×5

 · PDF 檔案

1x USB 2.0 bus for USB2.0 to 4 x UART IC(Fintek F81534) Rear Panel I/O 1x DC12V Jack connector 1x DVI-I connector (Digital signal only) 1x HDMI Type A connector 2x USB 2.0 connector (with 5V and The current is 500mA) 1x RJ45 LAN connector (10/100

diff –git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index 3d616a2..3f47afa 100644— a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534

【供应】fintek代理商,fintek 总代理商,精拓代理商 查看图 · 当 前 价: 0.01/PCS · 最小起订: 660PCS · 供货总量: 1000000PCS · 发 货 期: 1天内发货 · 所 在 地: 中国 · 发布时间: 2020-02-12

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. Thi